Bag welding machine with work table
About the product
The device is used for closing PE bags into which products are packed. For easier handling of bags, better visibility and the need for a weighing scale, the device is placed on a work table on which there is lighting and a scale for dosing the products. First, the operator fills the bag to a specified weight and then carries out its sealing.
The bag sealing is done by applying a combination of pressure between a hot bar and the bag, and heat emitted by an electric heater housed within the hot bar. The pressure on the hot bar is applied by a foot-pedal, so through levers the force is transferred to the hot bar. The temperature of the hot bar is adjusted via a thermostat located on the sealer. It is important to note that the temperature regulation is achieved using a PID controller, which ensures a constant temperature during the bag sealing process.
Technical information
| Installed power (kW) | 0.7 kW |
| Seal length (mm) | 490 |
| Seal width (mm) | 15 |
| Maximum bag width (mm) | 450 |
| Dimensions (mm) | 1330x950x1850 |
| Worktable shelf height (mm) | 900 |
| Lighting | LED lamps |


